JZJ Turbine Oil Filter on-line Sales Specifications and Dimensions
2018/11/26 Viewers:
Notes for JZJ Turbine Oil Filter Core Turbine Oil Use:
(1) On the premise of ensuring lubrication, oil with smaller viscosity should be selected as far as possible, because oil with smaller viscosity has better heat dissipation and emulsifying resistance.
(2) The cooling water quantity of lubricating oil cooler should be adjusted regularly in use, so that the temperature of bearing oil return pipe can be controlled at about 60 C.
(3) In order to ensure that no sediment is produced, sludge precipitation test of mixed oil must be carried out beforehand when new oil is needed in the operation of steam turbine oil.
(4) Before changing oil, the lubrication system should be cleaned carefully to avoid contaminating new oil products. As long as 10% of the old oil products exist, the service life of the new oil products can be shortened by about 75%.
(5) Steam turbine oils of different varieties and grades should not be mixed at will.
(5) Turbine oil can not be replaced by other kinds of lubricants. If necessary, it can be replaced by steam turbine oil with higher viscosity.
_. Leakage and water leakage should be prevented in the process of use so as to avoid affecting the quality of oil and its service life.
Detailed Product Introduction Dimensions: Consult 18623439903 Managers
Detailed product hydraulic oil filter: http://www.yyylyj.com
FAQ Solutions for Turbine Oil of JZJ Turbine Oil Filter Core:
1. Can different manufacturers use the same type of steam turbines?
Because the additives in different manufacturer's products may have obvious differences, it is not recommended to mix them in general. If mixing is necessary, mixing tests should be carried out proportionally first, and mixing tests should be carried out after the test items are qualified.
2. What are the hazards of steam turbine oil emulsified?
Emulsion may destroy the oil film when it precipitates water from bearings and other places.
Emulsion can cause metal corrosion.
Emulsion is deposited in oil circulation system, resulting in insufficient oil supply.
After oil is emulsified, it is easy to cause accelerated aging of oil products. Naphthenic acid soap and colloid produced by aging further promote the emulsification of oil products.
It reduces the lubrication of oil products, increases friction between components, causes overheating of bearings and damages parts.
3. The difference of performance between Anti-Ammonia steam turbine oil and common steam turbine oil?
Anti-ammonia steam turbine oil is a device that compressors and steam turbines use nitrogen, hydrogen and ammonia as compression media to share the same lubrication system. The biggest difference between Anti-Ammonia steam turbine oil and ordinary steam turbine oil is that neutral or alkaline anti-rust agent is used instead of acid anti-rust agent T746 used in ordinary steam turbine oil to ensure that the oil does not react with ammonia in the system. White flocculent precipitation, so as to affect the normal operation of the machine.
4. Advantages of Gas Turbine Oil over General Steam Turbine Oil?
Gas turbine is characterized by energy-saving and power-saving. In the course of operation, lubricating oil is subjected to high heat surface action, mixed with air (flue gas), pumped and circulated at a considerable rate, and used under high pressure. Therefore, gas turbine oil is required to have better oxidation stability and wear resistance at high temperature than steam turbine oil. 。
Technical Performance of JZJ Turbine Oil Filter
Filtration accuracy: 0.1 um0.2 um0.45 um1 UM3 um5 um10 um20 um30 um50 um
Length of filter element: 5 "10" 20 "30" 40"
Diameter of filter element: 69 mm 83 mm 131 mm
The inner diameter of filter element: 28mm~40mm
PH value for trial: 1-12
Maximum operating temperature: <80 ~0.1Mpa
Maximum working pressure: 0.3Mpa 50 C
Maximum Backpressure Difference: 0.2Mpa 25 Temperature
Maximum disinfection temperature: 120 C for half an hour each time
(1) On the premise of ensuring lubrication, oil with smaller viscosity should be selected as far as possible, because oil with smaller viscosity has better heat dissipation and emulsifying resistance.
(2) The cooling water quantity of lubricating oil cooler should be adjusted regularly in use, so that the temperature of bearing oil return pipe can be controlled at about 60 C.
(3) In order to ensure that no sediment is produced, sludge precipitation test of mixed oil must be carried out beforehand when new oil is needed in the operation of steam turbine oil.
(4) Before changing oil, the lubrication system should be cleaned carefully to avoid contaminating new oil products. As long as 10% of the old oil products exist, the service life of the new oil products can be shortened by about 75%.
(5) Steam turbine oils of different varieties and grades should not be mixed at will.
(5) Turbine oil can not be replaced by other kinds of lubricants. If necessary, it can be replaced by steam turbine oil with higher viscosity.
_. Leakage and water leakage should be prevented in the process of use so as to avoid affecting the quality of oil and its service life.
Detailed Product Introduction Dimensions: Consult 18623439903 Managers
Detailed product hydraulic oil filter: http://www.yyylyj.com
FAQ Solutions for Turbine Oil of JZJ Turbine Oil Filter Core:
1. Can different manufacturers use the same type of steam turbines?
Because the additives in different manufacturer's products may have obvious differences, it is not recommended to mix them in general. If mixing is necessary, mixing tests should be carried out proportionally first, and mixing tests should be carried out after the test items are qualified.
2. What are the hazards of steam turbine oil emulsified?
Emulsion may destroy the oil film when it precipitates water from bearings and other places.
Emulsion can cause metal corrosion.
Emulsion is deposited in oil circulation system, resulting in insufficient oil supply.
After oil is emulsified, it is easy to cause accelerated aging of oil products. Naphthenic acid soap and colloid produced by aging further promote the emulsification of oil products.
It reduces the lubrication of oil products, increases friction between components, causes overheating of bearings and damages parts.
3. The difference of performance between Anti-Ammonia steam turbine oil and common steam turbine oil?
Anti-ammonia steam turbine oil is a device that compressors and steam turbines use nitrogen, hydrogen and ammonia as compression media to share the same lubrication system. The biggest difference between Anti-Ammonia steam turbine oil and ordinary steam turbine oil is that neutral or alkaline anti-rust agent is used instead of acid anti-rust agent T746 used in ordinary steam turbine oil to ensure that the oil does not react with ammonia in the system. White flocculent precipitation, so as to affect the normal operation of the machine.
4. Advantages of Gas Turbine Oil over General Steam Turbine Oil?
Gas turbine is characterized by energy-saving and power-saving. In the course of operation, lubricating oil is subjected to high heat surface action, mixed with air (flue gas), pumped and circulated at a considerable rate, and used under high pressure. Therefore, gas turbine oil is required to have better oxidation stability and wear resistance at high temperature than steam turbine oil. 。
Technical Performance of JZJ Turbine Oil Filter
Filtration accuracy: 0.1 um0.2 um0.45 um1 UM3 um5 um10 um20 um30 um50 um
Length of filter element: 5 "10" 20 "30" 40"
Diameter of filter element: 69 mm 83 mm 131 mm
The inner diameter of filter element: 28mm~40mm
PH value for trial: 1-12
Maximum operating temperature: <80 ~0.1Mpa
Maximum working pressure: 0.3Mpa 50 C
Maximum Backpressure Difference: 0.2Mpa 25 Temperature
Maximum disinfection temperature: 120 C for half an hour each time
- Pre：Size specification of filter e 2018/11/26
- Next：Dimension specification of fil 2018/11/26